CMMC Level 2 Self-Assessment: What It Involves

A CMMC Level 2 self-assessment is your own evaluation of the systems that handle Controlled Unclassified Information against the 110 requirements of NIST SP 800-171 Rev 2. You score it, enter the results in SPRS and affirm them. All requirements MET gives a Final status; a score of 88 or more with an allowed POA&M gives a Conditional one.

By Hemant Bundele

Last reviewed: November 16, 2026

What it is and who decides you need one

A Level 2 self-assessment is the activity a company performs to evaluate its own information system when seeking a CMMC Status of Level 2 (Self).

Under the CMMC rule, a subcontractor that will process, store or transmit CUI needs at least a CMMC Status of Level 2 (Self), and Level 2 (C3PAO) if the prime contract requires that status.

The contract or solicitation states which level and assessment type applies: DFARS 252.204-7021 has the contracting officer fill in the required CMMC level, and you must have and maintain a current status at that level, or higher, for the duration of the contract.

A Level 2 (Self) status also satisfies Level 1 (Self) for the same assessment scope.

For which levels and assessment types solicitations can require today, see the CMMC compliance overview.

Set the scope first

Before a Level 2 self-assessment, you must specify the CMMC Assessment Scope: the set of all assets in your environment that will be assessed against CMMC security requirements.

32 CFR 170.19 sorts assets into categories, each with its own documentation and assessment treatment:

Asset categoryWhat it coversWhat you documentHow it is assessed
CUI AssetsProcess, store or transmit CUIAsset inventory, SSP, network diagramAgainst all Level 2 requirements
Security Protection AssetsProvide security functions or capabilities to the assessment scopeAsset inventory, SSP, network diagramAgainst the Level 2 requirements relevant to the capabilities they provide
Contractor Risk Managed AssetsCan, but are not intended to, process, store or transmit CUI, because of your security policies, procedures and practicesAsset inventory, SSP, network diagramSSP review; a limited check if the documentation raises questions
Specialized AssetsCan process, store or transmit CUI but cannot be fully secured: IoT and IIoT devices, operational technology, government-furnished equipment, restricted information systems, test equipmentAsset inventory, SSP (showing they are managed under your risk-based policies), network diagramSSP review only
Out-of-Scope AssetsCannot process, store or transmit CUI, and do not protect CUI assetsBe ready to justify why they cannot handle CUINone

Summarized from table 3 to 32 CFR 170.19(c)(1).

If an external service provider handles CUI or security protection data for you, its use, its relationship to you and the services it provides must be documented in your system security plan.

A cloud service provider that handles CUI must meet the FedRAMP requirements in DFARS 252.204-7012.

The 110 requirements and how each is judged

The security requirements in CMMC Level 2 are identical to the 110 requirements in NIST SP 800-171 Revision 2, even though NIST has withdrawn Revision 2 and replaced it with Revision 3.

You assess them with NIST SP 800-171A, the June 2018 assessment procedures the CMMC rule names; NIST has withdrawn that edition too, but it is the one the rule incorporates.

NIST SP 800-171A breaks each requirement into assessment objectives, and implementing a requirement means meeting all of its applicable objectives.

For example, 3.12.4, the system security plan, has eight objectives; the system security plan guide lists them.

A requirement is MET when all of its applicable objectives are satisfied based on evidence, and NOT MET when one or more is not.

An objective that does not apply is N/A, which counts the same as MET.

The rule's example of N/A is public-access system separation (3.13.5) when there are no publicly accessible systems in the assessment scope.

Evidence has to be final: the CMMC scoring rule does not accept working papers, drafts, or unofficial or unapproved policies.

An enduring exception described with its mitigations in the system security plan, and a temporary deficiency addressed in an operational plan of action, are both assessed as MET.

The score and the minimum for a Conditional status

The SPRS score guide explains the point values and the partial credit for 3.5.3 and 3.13.11.

CMMC Level 2 uses the same arithmetic: under 32 CFR 170.24, the maximum is the number of Level 2 requirements, and the value of each NOT MET requirement is subtracted from it.

For a CMMC Level 2 Conditional status, the score must be at least 0.8 of the maximum, which is 88 of 110, and no item on the POA&M may be worth more than 1 point, except 3.13.11 when encryption is employed but not FIPS-validated.

To run the arithmetic on your own answers, use the SPRS score calculator; the POA&M rules guide lists the requirements that can never go on a POA&M.

Conditional vs Final

You achieve a Final Level 2 (Self) status when every requirement is MET, either at the first self-assessment or after a POA&M closeout self-assessment.

You achieve a Conditional Level 2 (Self) status when the self-assessment results in a POA&M that meets every condition in 32 CFR 170.21.

Within 180 days of the Conditional status date, you must fix the NOT MET requirements, perform a POA&M closeout self-assessment and post the results to SPRS.

If it is not closed out in time, the Conditional status expires; if that happens during a contract, standard contractual remedies apply and you are ineligible for new awards at that level until you achieve a new status.

After a successful closeout, the CMMC Status Date stays the date of the Conditional status; a Final that follows a Conditional gets no new date.

What goes into SPRS

The self-assessment results in SPRS include at least the CMMC level, the CMMC Status Date, the assessment scope, the company entities covered by that scope, the overall score (for example 105 out of 110) and any POA&M use and compliance status.

Before award of a contract that requires Level 2 (Self), you need both a Conditional or Final Level 2 (Self) status and an affirmation in SPRS.

The affirmation

Affirmation of the Level 2 (Self) status is required at the time of each assessment and annually thereafter.

Your Affirming Official also affirms after a POA&M closeout self-assessment.

The annual affirmation guide covers who the Affirming Official is and what they attest to.

How long the status lasts

To keep a Level 2 (Self) status, you conduct a new self-assessment every three years and submit the results in SPRS.

Under DFARS 252.204-7021, a Final Level 2 (Self) status is current only if it is not older than three years, with no changes in compliance since the status date and an affirmation not older than one year.

A Conditional Level 2 (Self) status is current for no more than 180 days.

DoD may also conduct a DCMA DIBCAC assessment of a company with a Level 2 (Self) status, and if it shows the requirements were not achieved or maintained, its results take precedence over the existing status.

Keep the evidence as you go: assessment artifacts must be retained for six years from the CMMC Status Date.

How it differs from a C3PAO assessment

  • Who assesses. A Level 2 certification assessment is performed by an authorized or accredited C3PAO, using the same NIST SP 800-171A procedures, scoping rules and CMMC scoring.
  • Where results go. A C3PAO enters its assessment results into the CMMC instance of eMASS, which sends them to SPRS automatically.
  • Closeout. A POA&M closeout after a certification assessment must also be performed by a C3PAO.
  • What it covers. A Level 2 (C3PAO) status also satisfies Level 1 (Self) and Level 2 (Self) for the same assessment scope.

How CMMCSync helps

The Maintain plan covers CMMC Level 2 readiness: SPRS score tracking, POA&M management and a Mock Assessment, with document exports that carry no draft watermark. See what each plan includes on the pricing page.

Sources

  1. 32 CFR 170.4, Acronyms and definitions
  2. 32 CFR 170.14, CMMC Model
  3. 32 CFR 170.16, CMMC Level 2 self-assessment and affirmation requirements
  4. 32 CFR 170.17, CMMC Level 2 certification assessment and affirmation requirements
  5. 32 CFR 170.19, CMMC scoping
  6. 32 CFR 170.21, Plan of Action and Milestones requirements
  7. 32 CFR 170.22, Affirmation
  8. 32 CFR 170.23, Application to subcontractors
  9. 32 CFR 170.24, CMMC Scoring Methodology
  10. DFARS 252.204-7021, Contractor Compliance with the CMMC Level Requirements
  11. NIST SP 800-171 Revision 2, Protecting Controlled Unclassified Information in Nonfederal Systems and Organizations
  12. NIST SP 800-171A, Assessing Security Requirements for Controlled Unclassified Information (June 2018)
  13. NIST SP 800-171 DoD Assessment Methodology, Version 1.2.1 (June 24, 2020)

General information, not legal advice.

Stay assessment-ready between assessments.

Start with Foundations (Free) for the Level 1 self-assessment, or talk to the founder about what your contract requires.

Free to start — no application, no quote call. Cancel paid plans anytime.